|
PRODUCTION SPEED
|
1-35 loads per hour
NOTE: Process rates will vary with load size, number of wraps &
forklift load/unload time
|
| LOAD CAPACITY
|
Maximum load weight: 5,000# dynamic – 10,000# static
Maximum load size: 50” W x 50” L (71” max. load
diagonal) x 80” H (plus up to 2” top overlap)
|
|
TURNTABLE
|
57” diameter laser-cut steel plate with surround deck
protection - 3/8” thick
Maintenance free - 36 roller bearing support system
Turntable height 2.938” from floor
ANSI # 50 direct chain drive c/w chain tensioner
3-12 RPM rotational speed c/w soft start acceleration
1/2 HP DC variable speed motor
Final revolution deceleration and positive stop alignment
Rugged surround deck for added protection, 3 sided loading
and pit mounting
Front and back forklift ports for easy movement
Accu-Count exact turntable positioning system for additional
film savings!
Optional loading ramp 60” long x 48” wide complete with 10”
level porch area available |
|
FILM CARRIAGE
ELEVATOR
|
1/2 HP DC variable speed motor
ANSI #40 direct chain drive c/w shock dampener & Anti-Fall
Safety Device
Maintenance free 12 point carriage guidance system
|
|
FILM DELIVERY
SYSTEM
|
Super Rapid Thread ™ 20” capacity pre-stretch carriage
with Patent Pending pressure balanced nip roller system
1/2 HP DC variable speed motor
Fully electronic dynamic dancer corner compensation
33 to 313% fixed stretch capability
Pre-stretch ratio variable by easy sprocket change
Rapid Thread ™ Safety Door with auto power cut-off
switch
Carriage Descent Obstruction Safety Shut-Off Device
Side mounted film carriage for operator convenience and
safety |
|
AUTOMATION
FEATURES
|
“All Electric – No Pneumatics Required”
“Patent Pending” Cousins exclusive patent pending A-Arm film
cut and hold device starts and ends the wrap process at the top
of the load. This uniquely different approach to attaching and
cutting the stretch film provides you with these benefits:
Selectable top banding capability
Stabilizes the load early in the wrap cycle
Places the ending film tail at the top of the load instead of the
bottom
There is no film clamp on the turntable that can be damaged
by debris or operator error – also eliminates the need for sliprings
to supply power onto the turntable for less maintenance
Load placement on the turntable is not critical
No air hook-ups or noisy compressors
Automatic First Revolution Load Scanning Safety
Feature detects uneven or partial stacked top layers and
automatically adjusts A-Arm height clear of obstructions
A-Arm Anti-Fall Safety Device |
|
CONTROL FEATURES
|
PANASONIC PLC with Touchscreen Operator Interface
Power Off – On – Reset switch & Power On indicator light
Single button Auto Wrap Cycle Start/Pause
Cycle Pause for applying top sheets
Reinforce Wrap control for mid-wrapping
Emergency Stop button
Turntable Jog button
Film Carriage Lower & Raise buttons
Film tension (Force-to-Load) control
Separate film carriage raise & lower speed controls
Variable turntable speed control
Triple beam auto load height sensing photo-eye, detects dark
or shiny loads
Separate 1 to 12 revolution top & bottom wrap control
Selectable Reduced Film Tension parameters for wrapping
top and/or bottom of load
A – B – C Wrap Program selector with capability to input and
store unique wrapping parameters for each program
Pendant Start/Stop push-button station for remote operator
control – optional lanyard or wireless remote control available
NEMA 12 control panel enclosure
Non-proprietary UL/CSA approved components
3 wrap modes: automatic spiral wrapping / automatic top
banding / semi-automatic
3 machines in one! |
|
STRUCTURAL
FEATURES
|
All structural steel construction
Forklift truck portable base structure design – lifting tubes
included for front and rear access
Fully guarded structural steel H-beam machine tower
Electro-static powder coated paint finish |
|
ELECTRICAL INPUT
REQUIREMENTS
|
115 Volts 1 Phase 60 Hz 15 Amps
|
